Information

Potentiostat| Galvanostat

Model : ZIVE SP5
Company : WonATech
Country : South Korea

ZIVE SP5, the outstanding potentiostat/galvanostat/FRA, is the best choice for the complete DC and impedance characterization of various electrochemical application

Introduction

ZIVE SP5 is equipped with a frequency response analyzer(FRA) for system as standard and it provides high performance impedance measurements over the frequency range 10uHz to 1MHz. ZRA (zero resistance ammeter) function can measure max 5 A in galvanic corrosion technique. ZIVE SP5 can be easily upgraded with adding optional application software package without returning the system to the factory for upgrade.

Application

ZIVE SP5 electrochemical workstation is ideal for fundamental research in electrochemistry, development and quality assurance of new sensors, corrosion/coatings, electrode material, membrane, conducting polymer, evaluation power device research such as battery materials, fuel cells, super capacitors and solar cells.

Software (Smart Manager)

ZIVE SP5 electrochemical workstation use Smart Manager software. You can get more detailed information via above link.

Specification

Main system
PC communication	USB2.0 High Speed
Line voltage	100-240VAC, 50/60Hz, 1Amp
LED	Run,Busy,Potentiostat,Galvanostat
Size/weight	179 x 270 x 378.4(WHD) / 7.65kg
Power consumption	24V@6.3A 150Watt
System
Cell cable	(1meter shielded type (Standard
	Power terminal: Working, counter,
	Sensing terminal: Reference, Working sense
Control	DSP with FPGA
Calibration	Automatic
Data acquisition	2x16bit ADCs (500kHz)for voltage, current
ADC	4x 16bit ADCs(250kHz) for auxiliary voltage & temperature reading
DAC	2x16bit DAC(50MHz) for bias & scan
	1X16bit DAC(1MHz) for analog output
Filter	4ea (5Hz,1kHz,500kHz, 5MHz)
Scan rate	0 – 200V/sec
	0-5000V/sec(fast scan)
Max. channel No.	32 Channels via USB connection
Internal Data Memory	295,000 points
LCD Display	DC & EIS mode automatically
Power amplifier(CE)
Power	50Watt (10V@5A)
Compliance voltage	±10V
Maximum current	±5A
Control speed selection	8ea
bandwidth	2MHz
Slew rate	10V/usec
Potentiostat mode(voltage control)
- voltage control
Control voltage range	±10V, ±1V, ±100mV
Voltage resolution	16 bit per each range
Voltage accuracy	±1mV±0.05% of setting
Max. scan range	±10V vs. ref. E
- current measurement
Current ranges	12 ranges(auto/manual setting)
	50pA ~ 5A
	(50pA & 500pA with gain)
Current resolution	16 bit;
	150uA,15uA,1.5uA,150nA,15nA,1.5nA,
	150pA,15pA, 1.5pA, 150fA,15fA,1.5fA
Current accuracy	±10pA±0.1% of range(gain x1)>500nA fs
Galvanostat mode(current control)
- Current control
Control current range	Max. ±5A
	± full scale depending on selected range
Current resolution	16 bit;
	150uA,15uA,1.5uA,150nA,15nA,1.5nA,
	150pA,15pA, 1.5pA, 150fA,15fA,1.5fA

Current accuracy	±10pA±0.1% of range(gain x1)>500nA fs
- Voltage measurement
Voltage ranges	10V,1V,100mV
Voltage resolution	16 bit; 0.3mV,30uV,3uV
Voltage accuracy	±1mV±0.05% of reading
Electrometer
Max input voltage	±10V
Input impedance	2x1013¥Ø\|\|4.5pF

Bandwidth	>22MHz
CMRR	>114db
EIS(Internal FRA) for system
Frequency range	10uHz ~ 1MHz
Frequency accuracy	0.01%
Frequency resolution	5000/decade
Amplitude	0.1mV ~ 5V rms (Potentiostatic)
	0.1 ~ 70% f.s(Galvanostatic)
Mode	Static EIS:
	Potentiostatic, galvanostatic, pseudo-galvanostatic, OCP
	Dynamic EIS:
	Potentiodynamic, Galvanodynamic
	Fixed frequency Impedance:
	Potentiostatic, Galvanostatic, potentiodynamic, galvanodynamic
	Multisine EIS:
	Potentiostatic, Galvanostatic
	Intermittent PEIS/GEIS
Interfaces for system
Auxiliary port
Digital output	3 (open collector)
Digital input	2 (photo coupler)
Auxiliary voltage inputs	3 analog Inputs: ±10V
	For measurement of WE vs. CE
	CE vs. RE or other signal
Analog output	1 analog output: ±10V
	For stirrer, MFC, RDE etc.
Misc. port
Sig generator output	1 analog output for FRA output or
	waveform generation output
Peripheral communication	I2C to control external devices

Temperature measurement	1 K-type thermocouple input
Zero Resistance Ammeter	5nA ~ 5A ranges
Software
Max steps per experiment	1000
Shutdown safety limits	Voltage, current, temperature etc
Max. sampling rate	20kHz(50usec)-burst mode/500jHz(2usec) in fast sweep mode
Max. sampling time	unlimited
Sampling condition	Time, dv/dt, dI/dt, temp etc.
PC requirement
Operating system	WindowsXP SP3/7/8/10
PC specification(minimum)	Pentium4, RAM 1GB
Display	1600x900 high color
USB	High speed 2.0
Dummy cell	One external dummy cell included
Thermocouple	1.5meter K-type (option)
Auxiliary cable	Option
Misc. cable

Potentiostat| Galvanostat ZIVE-SP5

Information