Application:
- Low current application (Max.10mA)
- Sensor application
- Electroanalytical application
- Micro battery application
- Compact size
- Multi working electrodes, single reference & single counter electrode
- Max. 64 channel control per PC
System hardware is based on WMPG series multichannel potentiostat/galvanostat. The system contains independent channel controller, a multiplexed data acquisition circuitry. This system can provide two mode(General mode: general multichannel potentiostat/galvanostat with eight working electrodes, eight reference electrodes and eight counter electrodes or Sensor mode: a multi-potentiostat with eight working electrodes, one common reference electrode and one common counter electrode). The sensor mode is designed so that eight working electrodes are in the same electrochemical cell. The potential control range is following customer specification. Each electrode can be individually controlled, including on/off control, potential and current range settings.
Each substation can be used as independent system with optional StartUp Kit or can be built up integrated system as add-on. These give flexibility to users application.
Feature
For stable and accurate target
- 4 probe type true potentiostat/galvanostat circuit
- High resolution 16 bit ADC/DAC: WMPG provides 0.0015% f.s resolution in control and acquisition both.
- Channel isolation: To prevent any noise from the other channel, each channel is designed for isolation.
- Multiple current ranges: 5 ranges. Auto/manual selection
For easy expansion/maintenance target
Channel Plug-in module: Plug-in module is easily upgradeable or modifying voltage/current range. Also if one channel is out of order, Just replacement is easiest way to clean the problem. Option module is plug-in type too. It means upgrade is very easy. For one board type per 8 channels, if one channel is out of order, user cannot use all 8 channels.
Substation add-on type: WMPG series can expand the channels up to 64 channels per system. When the user wants to expand the channels, he/she just adds the substation. One of modular system’s advantages is maintenance. If one substation is out of order in power supplier’s part, the other substations can be run without dead time.